| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Driven Type: | Electric |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2, Main technical parameters
2.1 Twisted single wire diameter
copper: Ø 1.8- Ø 4.6mm
Aluminum: Ø 2.0- Ø 5.0mm
2.2 Maximum twisted outer diameter of 45mm
2.3 Twisted pitch
06 disc 43-574mm
12 disks 46-603mm
2.4 Maximum frame roll speed
06 disk 220 r/min
12 disks at 199 r/min
2.5 Maximum traction line speed 65m/min
2.6 Pulling wheel diameter Ø 1600mm
2.7 Specification of Cable Tray within the Framework PND630
2.8 Specification of central pay off reel:PN800-1600
2.9 Cable reel specifications PN1250~PN2500
2.10 6-disk motor power 55kW (AC variable frequency motor)
2.11 12 disc motor power 75kW (AC variable frequency motor)
2.12 Traction motor power 75kW (AC variable frequency motor)
2.13 Equipment center height 1000mm
3, Main components
3.1 One set of Φ 1600 end shaft pay off rack
3.2 Well type wire frame 1 set
3.3 1 set for each of the 6 and 12 twisted coils
3.4 Two sets of side lower upper plate devices
3.5 Parallel Line Compression Seat 2 sets
3.6 One set of vertical meter counter
3.7 Φ 1600 Strong Dual Traction Machine 1 set
3.8 Φ 2500 end shaft cable rack, 1 set
3.9 Electrical control system 1 set
3.10 Two sets of electric protective nets
4, Technical parameters and structure of main components
4.1 Φ 1600 end axis pay off rack
4.1.1 Cable reel specifications PN800-1600
4.1.2 Maximum load capacity of 12t
4.1.3 Adopting an end axis top pin type, the top pin can move up and down simultaneously or separately to ensure height adjustment, with two columns
It can move axially simultaneously or independently, and is equipped with limit protection for the upper and lower plates.
4.1.4 Mechanical friction controls the tension of the wire release, with adjustable size.
4.2 6 and 12 disc twisted bodies
4.2.1 Cable reel specification PND630
4.2.2 Maximum frame speed
6 disks at 220r/min
12 discs at 199r/min
4.2.3 Twisted pitch (infinitely adjustable)
6 disks 43-574mm
12 discs 46-603mm
4.2.4 Twisted motor power
6 disks of 55kW (AC variable frequency motor)
12 disks 75kW (AC variable frequency motor)
4.2.5 Frame structure, with double support for the front and rear of the entire hinge. Each section of the twisted body is driven by a separate AC variable frequency motor with direct variable speed
| Single Wire Diameter | Copper wire with a diameter |
Aluminum wire with a diameter |
| 1.2mm-5mm | 1.8mm to 4.6mm |
2.0mm to 5.0mm |
Q1.Are you the manufacturer or trading company?
){kind=link}